Reverse Image - SATO CX Series Programming Manual

SATO CX Series Printer
Command Structure
<ESC>(aaaa,bbbb
a
b
Example:
Placement:
Default:
Command Function
To reverse an image area from black to white and vice versa.
Use the Print Position commands (<ESC>H and <ESC>V) to
locate the top left corner of the reverse image area.
Input to Printer
<ESC>A
<ESC>H0050<ESC>V0120<ESC>L0202<ESC>WB1REVERSE
<ESC>H0250<ESC>V0300<ESC>L0202<ESC>WB1HALF
<ESC>H0040<ESC>V0110<ESC>(370,100
<ESC>H0240<ESC>V0290<ESC>(220,47
<ESC>Q1<ESC>Z
64

Reverse Image

Reverse Image
Reverse Image Reverse Image
= Horizontal length in dots of reverse image
area
0000 to 0832
= Vertical height in dots of reverse image area.
0000 to 1424
<ESC>(100,50)
This command must be preceded by all other
data and be placed just before <ESC>Q
None