Sequential Numbering - SATO CX Series Programming Manual

SATO CX Series Printer
Command Structure
<ESC>Faaaabcccc,dd,ee
aaaa
b
cccc
,dd
,ee
Example:
Placement:
Default:
Command Function
To allow the ability to print sequential fields (text, bar codes)
where all incrementing is done within the printer. Up to eight
different sequential fields can be specified per label. Sequen-
cing is effective for up to 99-digit numeric data within each
field.
70

Sequential Numbering

Sequential Numbering
Sequential Numbering Sequential Numbering
= Number of times to repeat the same data
(0001-9999)
= Plus or minus symbol (+ for increments; - for
decrements)
= Value of step for sequence (0001-9999)
= Number of digits for sequential numbering
(01-99). The first incrementing character posi-
tion starts after the positions exempted from
sequential numbering as specified in ee. If the-
se digits are left out, the default is 8.
= Number of digits free from sequential numbe-
ring (00-99) starting with the right most positi-
on. If these digits are left out, default is 0.
<ESC>F0001-0001,04,03
Decrementing
In this example, the right most (least signifi-
cant) three digits would not decrement and the
next four would decrement.
Preceding the starting value to be incremented
or decremented.
None
004321321
Free from Decrementing