Resetting The Driver/Controller To Its Factory Default Settings; Figure 4.18: Resetting The Driver/Controller To Its Factory Default Settings - eldoLED LINEARdrive User Manual

4.2.10 Resetting the driver/controller to its factory default settings

To reset the driver/controller to its factory default settings:
1. Press M, - and + simultaneously for 5 seconds.
2. The display shows "RE-" "SET" and "PRES MENU"
3. Press M to carry out the reset, or do not press any button for 8 seconds - this allows
you to exit the menu without actually carrying out the reset.

Figure 4.18: Resetting the driver/controller to its factory default settings

40
-
M + (5 sec)
+ +
Reset
RE - SET
PRES MENU
Press menu
M
display off