SATO CL608e Operator's Manual page 53

Section 3. Configuration
CARD COPY/FORMAT
XXXXXXX ERROR
CARD->MEMORYCOPY
SATOFONT
COPY START
YES
SATO FONT COPY
COPYING
SATO FONT COPY
COMPLETED
CARD COPY/FORMAT
XXXXXXX ERROR
CARD->MEMORYCOPY
ALL
COPY START
YES
CARD->MEMORY
COPYING
CARD-.MEMORY
COMPLETED
CARD COPY/FORMAT
XXXXXXX ERROR
Page 3-16
5. If an error is encountered in the copy process, one of the
following messages will be displayed on the second line:
R/W Error
No Card Error
Mem Full Error
This selection allows you to copy SATO fonts from the
PCMCIA Memory card installed in the Memory Card slot on
Y/N
the rear of the printer to the optional Flash ROM.
1. Use the LINE key to step the cursor to desired setting. If
Yes is selected, the printer will enter the Card Copy mode.
If No is selected, the display will advance to the Card to
Memory Copy All mode.
2. Confirm your selection by stepping the cursor to the Yes
selection. If you select No, the display will return to the
NO
previous selection.
3. Press the FEED key to accept the selection. If Yes was
selected the copy process will start
4. Once the copy process is completed, press the FEED key
to step the display.
5. If an error is encountered in the copy process, one of the
following messages will be displayed on the second line:
R/W Error
No Card Error
Mem Full Error
This selection allows you to copy the entire contents from the
PCMCIA Memory card installed in the Memory Card slot on
Y/N
the rear of the printer to the optional internal Expanded
Memory.
1. Use the LINE key to step the cursor to desired setting. If
Yes is selected, the printer will enter the Card Copy mode.
If No is selected, the display will advance to the Card to
Memory Copy All mode.
2. Confirm your selection by stepping the cursor to the Yes
selection. If you select No, the display will return to the
NO
previous selection.
3. Press the FEED key to accept the selection. If Yes was
selected the copy process will start
4. Once the copy process is completed, press the FEED key
to step the display.
5. If an error is encountered in the copy process, one of the
following messages will be displayed on the second line:
R/W Error
No Card Error
Mem Full Error
PN 9001074 Rev. B
Indicates a Read/Write error occured
Indicates no card was regognized
Indicates that there is insufficient
memory available.
Indicates a Read/Write error occured
Indicates no card was regognized
Indicates that there is insufficient
memory available.
Indicates a Read/Write error occured
Indicates no card was regognized
Indicates that there is insufficient
memory available.
SATO CL Series "e" Printers