SATO CL608e Operator's Manual page 33

Section 2. Installation
REAR PANEL
Power On/Off Switch:
AC Input:
AC Fuse:
Interface Slot:
Memory Card Slot:
EXT:
Cover Plate
Remove for access to Dispenser
and Fan-Fold Slots
Page 2-16
Turns power On or Off.
Input 115V 50/60 Hz connector. Use the cable
provided.
Input power protection. Type 3A/250V.
Slot to plug in an interface adapter. An adapter must be
connected before the printer is operational.The adapter
types available are:
RS232C Serial I/F Module, DB-25P.
IEEE1284 Parallel I/F Module, AMP 57-40360
Universal Serial Bus I/F Module
Ethernet 10/100BaseT I/F Module
Two connectors for optional PCMCIA Memory Cards.
External signal connector, AMP 57-60140.
PN 9001074 Rev. B
CL608e and CL612e
PCMCIA Memory
Expansion slot
I/F Module
Parallel Shown
Power Switch
AC Fuse
External Accesory
Connector
AC Power Input
Connector
SATO CL Series "e" Printers