Agilent Technologies 85051B User's And Service Manual page 23

c. Let the alcohol evaporate, then blow the threads dry with a gentle stream of clean, low-pressure
compressed air or nitrogen. Always completely dry a connector before you reassemble or use it.
3. Clean the Mating Plane Surfaces
a. Apply a small amount of isopropyl alcohol to a lint-free cleaning swab.
b. Clean the center and outer conductor mating plane surfaces. Refer to
cleaning a female connector, avoid snagging the swab on the center conductor contact fingers by
using short strokes.
c. Let the alcohol evaporate, then blow the connector dry with a gentle stream of clean, low-pressure
compressed air or nitrogen. Always completely dry a connector before you reassemble or use it.
4. Inspect
Inspect the connector to make sure that no particles or residue remain. Refer to
page 3-3.
85051B
Use, Maintenance, and Care of the Devices
Cleaning Connectors
Figure 2-1 on page
"Visual Inspection" on
2-3. When
3-5