Agilent Technologies 85051B User's And Service Manual page 34

Use, Maintenance, and Care of the Devices
Making Connections
Figure 3-10. Mate the outer conductors of the airline and port 1 cable connector finger tight.
Figure 3-10 Connecting the Airline
8. Gently remove the cap from the "B" end of the outer conductor. Fully retract the threads on the port 2
cable.
9. Align the center conductor of the port 2 cable connector with the center conductor of the airline. Insert
the tip of the airline center conductor into the center conductor of the port 2 cable connector.
10. Mate the outer conductors of the port 2 cable connector and airline finger tight.
11. Torque the cable connectors as shown in
either hold its plastic insulation or use an open end wrench while you torque the connection.
3-16
Figure 3-11 on page 3-17. To keep the airline from turning,
85051B