The pump shaft is sealed with a mechanical seal and no adjustment is required. When
the pump is in operation, the water being pumped lubricates and cools the seal. If the
Prolonged dry pump operation or operating a dry pump at high speeds will reduce the
No lubrication is needed. The bearings are sealed, the primer and pedestal are oil-free
An annual test should be performed to check pump performance. This will reveal the
F-1031, Section 2124-P
Maintenance
All pump maintenance can be performed using standard tools.
Mechanical Seal
seal leaks, replace the entire seal.
life of the mechanical seal.
and the mechanical seal is lubricated by water..
condition of the internal components and if any repairs are required.
NOTICE
NOTICE
NOTICE
Lubrication
NOTICE
Testing
NOTICE
Page 10 of 10