Resetting The System To Default Settings; Via The App - eKey home series Operating Instructions Manual

Resetting the system to default settings

You can reset the system to its default settings either via the app, the finger scanner,
the control panel, or the digital input.
Resetting to default settings permanently deletes all rights and resets the system
settings to their defaults. Your system is then in the condition in which it was
delivered to you once more.

Via the app

The process of resetting to the default settings is initiated via the app. The finger
scanner settings are reset to their defaults. All user and administrator fingers will be
irrecoverably deleted. The coupling code is reset to the default setting of
relay switching time to 3 seconds, and the LED brightness of the finger scanner to
(LED on). These settings can only be made via the app.
Step Instruction
1st Start the ekey home app.
2nd Connect to the finger scanner.
3rd Select ADMINISTRATION.
4th Select
5th
Confirm that you wish to carry out the reset by selecting Continue.
✓ The finger scanner and the control panel have been reset to the default settings.
You can now recommission the system.
See "Configuration of normal mode and usage of the finger scanner with the app",
page 16.
30│en
RESET SYSTEM.
Resetting the system to default settings
9999 , the
2