Coupling A Mobile Device For The First Time - eKey home series Operating Instructions Manual

Coupling a mobile device for the first time

You need security codes for the coupling. The default admin coupling code or app
security code is 9999
Changing the security code: For security reasons, you must change the admin
coupling code to a 6-digit code the first time you perform the system admin coupling
process. Make a note of this code, as you will need it to couple additional mobile
devices.
 You must have downloaded the app to your mobile device in order to couple it for
the first time.
Step Action
1st
2nd Follow the
instructions
on the display
✓ The coupling between the finger scanner and the mobile device is established. The
system is in normal mode.
You can now start programming and managing the finger scan access control system
via the ekey home app.
Administration of the finger scanner with the ekey home App: The intuitive ekey
home app is now all you need for the administration of your finger scanner. Tap the
required functions in the app and follow the instructions on the display.
Configuration of normal mode and usage of the finger scanner with the app
.
NOTICE
Description
Start the ekey home app.
Couple the mobile device with
the finger scanner using the
default admin coupling code
9999.
NOTICE
Display
- -
The finger
scanner lights up
red/blue.
en│17