Storing User Fingers - eKey home series Operating Instructions Manual

Step Action
4th
✓ All administrator fingers were successfully stored. The system is in normal mode.
Restarting the finger scanner in admin mode: If, when the finger scanner is
restarted, admin mode is active and fewer than 4 administrator fingers are present,
all previously stored administrator fingers are deleted.

Storing user fingers

The system enables a maximum of 99 user fingers to be stored.
A user finger is any finger which is used for triggering an action on the control panel,
e.g., opening a door. We recommend storing 2 fingers in each case.
 The system is in normal mode.
Step Action
1st
2nd
3rd
Configuration of normal mode and usage of the finger scanner with administrator fingers
Description
To store administrator
fingers 2, 3, and 4, carry out
steps 2 and 3 for
administrator fingers 2, 3,
and 4.
NOTICE
Description
Carry out three Finger
Touches on the sensor within
5 s. This will take you to the
admin menu.
Swipe any administrator
finger over the sensor.
The administrator finger was
not recognized. Repeat step
1.
Carry out a Finger Touch on
the sensor within 5 s.
Display
The finger
scanner lights
up blue.
Display
The finger
scanner flashes
green
intermittently
on the left and
right.
The finger
scanner flashes
green.
The finger
scanner lights
up red.
- -
The finger
scanner lights
up orange.
en│25