Advertisement
Advertisement
Table of Contents
Related Manuals for FISNAR TD101
Summary of Contents for FISNAR TD101
- Page 1 TD101 Operating Manual Rev. B - Feb. 11 TD101 Tube Dispenser Instruction Manual...
- Page 2 TD101 Operating Manual Rev. B - Feb. 11 This page intentionally left blank...
-
Page 3: General Description
(very costly). With the TD101 Tube Dispenser method, all one has to do is attach a nozzle or an adapter to the material tube, then drop the tube into the tube dispenser and you are ready to start dispensing. - Page 4 TD101 Operating Manual Rev. B - Feb. 11 Using the Supplied Nozzle Part Number Description 560700 Nozzle 560699 Nozzle Nut 560698 O-Ring 560697 Lock Ring 560696 Seal Retaining Ring 560695 Seal 560705 5’ Hose 560704 Hose Fitting 560703 Connector 560702...
- Page 5 1 set 1. The TD101 Tube Dispenser is shipped to accommodate a nozzle(1*). In order to be able to use Luer lock tips, remove O-ring(3*) and Luer lock ring(4*) out of the gun assembly by means of a screw driver.
-
Page 6: Troubleshooting
Worm or missing O-ring seal – replace. 5. Relief poppet blows at too low an operating pressure. Relief poppet not seated properly - Contact Fisnar representative. Air not connected or pressure not high enough. Nozzle not cut. -
Page 7: Limited Warranty
TD101 Operating Manual Rev. B - Feb. 11 Limited Warranty Manufacturer warrants this product to the original purchaser for a period of ninety (90) days from date of purchase to be free from defects in material and workmanship, but not against damages caused by misuse, neglect, accident, faulty installation, abrasion, corrosion, or by “not”...
Need help?
Do you have a question about the TD101 and is the answer not in the manual?
Questions and answers