Previewing The Alarm And Turning The Alarm On/O - iHome iBTW38 Instruction Manual

Setting and Using the Alarm (Cont'd)
4. Press the Alarm Button to confirm the alarm schedule. The wake source indicator will
flash on the display. Press the – or +
source: Bluetooth or tone.
Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device
Wake to Tone:
5. Press the Alarm Button to confirm the alarm source. The volume display will flash.
6. Press the or
setting is stored separately from other volume settings.
7. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2
beeps will confirm alarm setting is complete. The alarm icon will remain on the display,
indicating the alarm is armed.

Previewing the Alarm and Turning the Alarm On/O

1. Press and release the Alarm Button to view the current alarm time.
2. Press and release the Alarm Button as needed to toggle the alarm ON and OFF,
indicated by the alarm icon and a beep.
is detected, the alarm will default to current Tone.
Press the Alarm Button to confirm. Press the – or + Buttons as
needed to listen to and to select one of the four built-in wake-to
tones (1 - 4).
Buttons to adjust the alarm volume. Note that the alarm volume
Using the
Buttons to select the desired wake to alarm
6
iBTW38