Rear Terminal - Sanyo PLV-Z4 Owner's Manual

Rear Terminal

HDMI
t
q COMPUTER
Connect the computer output, or RGB Scart 21-pin video
output to this connector (p.17).
w S-VIDEO
Connect the S-Video output from video equipment to
this jack (p.16).
e COMPONENT 1 or 2
Connect the component video output to these jacks
(p.16).
q w e
S-VIDEO
COMPUTER
Y
VIDEO
y
Part Names and Functions
COMPONENT1
SERVICEPORT
COMPONENT2
Pb/Cb Pr/Cr
r SERVICE PORT
This jack is used to service the projector.
t HDMI
Connect the HDMI output from video equipment to this
terminal (p.17).
y VIDEO
Connect the composite video output from video
equipment to this jack (p.16).
r
9