Information; Input Source Information Display - Sanyo PLV-Z4 Owner's Manual

Information

Input Source Information Display

This is used for checking the status of the image signal being projected and the operation of the projector.
Signal
Video or S-video
Component
HDMI
PC
No signal
Out of recognition
H-sync freq.
The horizontal frequency of the input signal is displayed in KHz, or
"- - - -" when no signal.
V-sync freq.
The vertical frequency of the input signal is displayed in Hz, or
"- - - -" when no signal.
Lamp Time
The cumulative lamp operating time is displayed.
40
A color system of the connected video
signal is displayed from among PAL,
SECAM, NTSC, NTSC4.43, PAL-M, PAL-N.
A system mode of the connected video
signal is displayed from among 480i, 480p,
575i, 575p, 720p, 1080i.
A system mode of the connected video
signal is displayed from among D-VGA, D-
480i, D-480p, D-575i, D-575p, D-720p, D-
1080i.
A resolution of the connected computer
signal is displayed.
When there is no signal input, "- - - -" is
displayed.
When the connected input source is out of
recognition, "Unknown" is displayed.
Information Menu