Basic Operation; Turning On The Projector - Sanyo PLV-Z4 Owner's Manual

Basic Operation

Turning On the Projector

1
Complete peripheral connections (with a computer, VCR,
etc.) before turning on the projector.
2 Connect the projector's AC power cord into an AC outlet and
turn the Main On/Off switch on. The POWER indicator lights
red.
3 Press the POWER ON-OFF button on the top control or on
the remote control. The POWER indicator turns green and
the cooling fans start to operate. The automatic slide shutter
opens, and then a preparation display appears on the screen
and the countdown will start.
4 After the countdown, the input source that was selected the
last time will appear on the screen.
✔
Note:
• If the automatic slide shutter is half-open, projector will not be turned on and the
POWER indicator will blink orange. In this case, press the POWER ON-OFF button
again.
• When "Countdown off" or "Off" is selected in the Display function, the countdown
will not be shown on the screen (p.36).
• During the countdown period, all operations are invalid.
18
POWER
POWER indicator
ON-OFF
button
Top Control
Main On/Off switch
OFF ON
Selected Input Source
Automatic Slide Shutter
Use this tab when handling manually.
Do not touch the slide shutter while it is
moving, as this could cause injury or the
projector to malfunction.
NO
FREEZE
SHOW
Remote Control