Maintenance And Cleaning; Warning Indicator - Sanyo PLV-Z4 Owner's Manual

Maintenance and Cleaning

Warning Indicator

The WARNING indicator shows the state of the function that protects the projector. Check the state of the WARNING
indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the WARNING indicator is blinking red.
When the temperature inside the projector reaches a certain level,
the projector will be automatically shut down to protect its inside.
The POWER indicator is blinking while the projector is being
cooled down. When the projector has cooled down sufficiently (to
its normal operating temperature), it can be turned on again by
pressing the POWER ON-OFF button.
✔
Note:
• The WARNING indicator continues to blink even after the temperature inside the
projector returns to normal. When the projector is turned on again, the WARNING
indicator stops blinking.
Then check the items below.
– Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if ventilation
slots are not blocked.
– Is the projector not installed near the ventilation duct of air-
conditioning equipment that may be hot? Install the projector
away from the ventilation duct of air-conditioning equipment.
– Are the air filters clean? Clean the air filters periodically or
replace it with a new one.
The projector is shut down and the WARNING indicator emits a red light.
When the projector detects an abnormal condition, it will be
automatically shut down to protect its inside and the WARNING
indicator will be red. In this case, unplug the AC power cord and
reconnect it, and then turn on the projector once again for check.
If the projector cannot be turned on and the WARNING indicator
emits a red light, unplug the AC power cord and contact the
service station for a checkup and repair.
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE AC
POWER CORD CONNECTED UNDER THE ABNORMAL
CONDITION. IT MAY RESULT IN A FIRE OR ELECTRIC
SHOCK.
TOP CONTROL
WARNING
blinking red
TOP CONTROL
WARNING
emitting a red light
41