Input; Input Source And System Selection - Sanyo PLV-Z4 Owner's Manual

Input

Input Source and System Selection

Choose an input source by pressing the INPUT button on the top
control or the INPUT buttons on the remote control.
✔
Note:
• Before selecting an input source with these buttons, each input must be set on a
proper signal form via menu operation on pages 25 and 26.
INPUT buttons
Press the VIDEO, S-VIDEO, C1, C2, HDMI or PC buttons on the
remote control according to the input source.
VIDEO When the video input signal is connected to the
VIDEO jack, select VIDEO.
S-VIDEO When the video input signal is connected to the S-
VIDEO jack, select S-VIDEO.
C1/C2 When the video input signal is connected to the Y-
Pb/Cb-Pr/Cr jacks, select C1 or C2.
HDMI When the video input signal is connected to the
HDMI terminal, select HDMI.
PC When the computer input signal is connected to the
COMPUTER connector, select PC.
24
Top Control
INPUT button
Remote Control
COMPONENT 1
VIDEO C1 HDMI
COMPONENT 2
S-VIDEO PC
C2
INPUT
CXTS
INPUT buttons: VIDEO/S-VIDEO/C1/C2/HDMI/PC
INPUT button
Video
S-video
Component 1
Component 2
HDMI
Computer