How To Operate The On-Screen Menu - Sanyo PLV-Z4 Owner's Manual

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu. The
menus have a hierarchical structure, with a main menu that is
divided into sub-menus, which are further divided into other sub-
menus. Refer to the following pages regarding each adjustment
and setting procedure.
1 Press the MENU button on the top control or on the remote
control to display the On-Screen Menu.
2
Use the Point ed
item. Press the Point
menu items. (The selected item is highlighted in ORANGE.)
3
Use the Point
item and press the Point
selected item.
4
Use the Point
switch between each mode and press the OK or Point
buttons to activate it and return to the sub-menu.
5
Return to the main menu by pressing the Point
exit the On-Screen Menu, press the MENU button again.
20
buttons to highlight or select a main menu
8 or OK buttons to access the sub-
ed buttons to select the desired sub-menu
8 or OK buttons to access the
7 8 or OK buttons to adjust the setting or
Top Control
Remote Control
LAMP
MENU
8
7 button. To
SCREEN
On-Screen Menu (Main Menu)
On-Screen Menu (Sub-Menu)
POINT buttons
(Arrows-marked)
OK button
MENU button
NO
FREEZE
MENU button
SHOW
RESET
POINT buttons
(Arrows-marked)
OK
OK button
IMAGE
IMAGE ADJ.
Point
Right or OK
The selected item is
buttons
highlighted in ORANGE.