Image Adjustment; Image Level Adjustment - Sanyo PLV-Z4 Owner's Manual

Image Adjustment

Image Level Adjustment

Image level can be adjusted for each input source and the adjustment is kept until the projector is turned off.
Direct Operation
Press the IMAGE ADJ. button on the remote control to display the
Image adj. Menu items one at a time and directly adjust the
selected item.
Use the Point ed buttons to select the desired item and the Point
7 8 buttons to adjust the settings. Press the MENU button after
adjusting.
If you press the OK button after adjusting each item, it enters the
On-Screen Menu.
Menu Operation
1 Select the Image adj. Menu with the Point
press the Point
items.
2 Use the Point
press the Point
The adjustment bar will be displayed.
3
Use the Point
press the OK button.
Brightness
Press the Point button to decrease the brightness; press the
7
Point 8 button to increase the brightness. (From -31 to +31.)
Contrast
Press the Point 7 button to decrease the contrast; press the Point
8 button to increase the contrast. (From -31 to +31.)
Color
Press the Point button to decrease the intensity of the color;
7
press the Point 8 button to increase the intensity of the color.
(From -31 to +31.)
Tint
Use the Point
7 8
proper color balance. (From -31 to +31.)
Color temp.
Use the Point 7 8 buttons to select the desired Color temp. level.
(High, Mid, Low1, Low2, or Low3.)
✔
Note:
• Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N
except for 575i.
• The Image adj. Menu cannot be operated without an input signal.
28
8 or OK buttons to access the sub-menu
ed buttons to select the desired item and
or OK buttons to access the selected item.
8
7 8 buttons to adjust the setting values and
buttons to adjust the tint value to obtain a
Remote Control
BRIGHTNESS CONTRAST
Brightness ➜ Contrast ➜ Color ➜ Tint ➜ Color
temp. ➜ Red ➜ Green ➜ Blue ➜ Sharpness ➜
Lamp control ➜ Gamma ➜ Progressive ➜ Lens
buttons and
ed
iris ➜ Lamp iris ➜ Auto black stretch➜ Contrast
enhancement ➜ Transient improvement ➜ Gain
R/G/B ➜ Offset R/G/B ➜ Gamma R/G/B ➜
Image adj. Menu
Go on to the next page...
MENU RESET
OK
SCREEN IMAGE
IMAGE ADJ. button
IMAGE ADJ.
BRIGHT CONT. COLOR
The selected item.
Press the Point
buttons to access the
selected item. The adjust-
ment bar will be displayed.
Use the Point
to adjust the setting values
and press the OK button.
If you press the Point
button, the next item can
be selected.
• • • • •
8 or OK
7 8 buttons
d