Present Ation; Dear Customer; Design And Features; Wsc 40 - Husqvarna WSC 40 Operator's Manual

Dear Customer ,

Thank y ou for choosing a Husqvarna product!
It is our wish that you will be satisfied with your product
and that it will be your companion for a long time. A
purchase of one of our products gives you access to
professional help with repairs and services. If the retailer
who sells your machine is not one of our authorized
dealers, ask him for the address of your nearest service
workshop.
This operator's manual is a valuable document. Make
sure it is always at hand at the work place. By following its
content (operating, service, maintenance etc.) the life
span and the second-hand value of the machine can be
extended. If you will sell this machine, make sure that the
buyer will get the operator´s manual.
More than 300 y ears of innovation
Husqv arna AB is a Swedish company based on a tradition
that dates back to 1689, when the Swedish King Karl XI
ordered the construction of a factory for production of
muskets. At that time, the foundation was already laid for
the engineering skills behind the development of some of
the world's leading products in areas such as hunting
weapons, bicycles, motorcycles, domestic appliances,
sewing machines and outdoor products.
Husqvarna is the global leader in outdoor power products
for forestry, park maintenance and lawn and garden care,
as well as cutting equipment and diamond tools for the
construction and stone industries.
Owner responsibility
It is the o wner's/employer's responsibility that the operator
has sufficient knowledge about how to use the machine
safely. Supervisors and operators must have read and
understood the Operator's Manual. They must be aware
of:
• The machine's safety instructions.
• The machine's range of applications and limitations.
• How the machine is to be used and maintained.
National legislation could regulate the use of this
machine. Find out what legislation is applicable in the
place where you work before you start using the machine.
The man ufacturer's reservation
Subsequent to pub lishing this manual Husqvarna may
issue additional information for safe operation of this
product. It is the owner's obligation to keep up with the
safest methods of operation.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
For customer information and assistance, contact us at
our website: www.husqvarna.com
4 – English
PRESENT A TION
Design and f eatures
V alues such as high performance, reliability, innovative
technology, advanced technical solutions and
environmental considerations distinguish Husqvarna's
products. Safe operation of this product requires the
operator to read this manual carefully. Ask your
Husqvarna dealer if you need more information.
Some of the unique features of your product are
described below.

WSC 40

This w all saw chain attachment is a part of a wall saw
system and works with the wall saws WS 440 and WS
482. The wall saw chain attachment is designed to cut
hard materials like reinforced concrete, masonry and
stone and should not be used for any purpose not
described in this manual. To operate this machine a
Husqvarna WS 440/WS 482 and a Husqvarna high
frequency power pack are required.
• This wall saw chain attachment is used to avoid
overcuts when cutting openings.
• The machine enables cutting of smaller openings for
ventilation, pipes, etc.
• The chain speed is electronically controlled and
adjusted using the remote control for the power unit.
• Same alignment between chain and track, as WS 440
and WS 482 with blade.
• The chain's direction of rotation can be controlled with
the remote control which allows one to choose the
direction of the water spray.
• The design is lightweight, compact and ergonomic
which makes the machine easy to transport.
• The specific software for WSC 40 is installed in the
power pack and makes automatic adjustments of the
feed motor movements to create straight plunge cuts.
Make sure that you have the latest software installed
in your power pack.