Page 7
F-5400 and will not appear as options to configure using this software program. 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 09/16 - 2032 / 107050...
Page 8
Note: The flow meter must be plugged into the computer in order for the system to register it. Fig. 2.3: COM Port Selection Window 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050 Page...
Note: It can be set for either automatic or manual scaling. 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050...
Page 10
"alarms window" displays any alarms or warnings. Exit Exit the application 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050 Page...
Page 12
Automatic mode lets the program adjust the scaling on a real-time basis based on the entire range of values. 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050...
Page 14
The "Unit Select" section is used to change the desired units in the flow rate, temperature and reference pressure parameters. 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050...
Page 15
Current sense voltage Elapsed Time: Time since the Totalizer was reset 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050 Page...
Page 16
Note: This feature is only accessed with a Level II password. 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050...
Page 17
Note: This feature is only accessed with a Level II password. 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050...
Page 18
Note: MODBUS and BACnet are only available on a F-5500 meter configured for RS485 Modbus RTU and BACnet MS/TP . 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050...
- and also displayed in the Data Logged window. Pressing "Stop Data Logging" ends data acquisition. 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050...
Enter the value, click OK, select the corresponding checkbox, and press "Start Simulation". 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050...
Page 22
In Simulation mode, all F-5000 outputs and the Totalizer respond as if in normal measurement mode. Click "Halt Simulation" to end. 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050...
Page 23
When ready to start, click the appropriate "Perform Zero CAL-CHECK" button. 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050...
Page 26
Resistance Temperature Detector Standard Temperature and Pressure Temperature Sense Current 11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com F-5000 Software Manual 10/16 - 2032 / 107050 Page...
Need help?
Do you have a question about the F-5000 and is the answer not in the manual?
Questions and answers