Preparations - Arjohuntleigh Carevo Instructions For Use Manual

Preparations

Actions Before the First Use
(11 Steps)
1 Visually inspect Carevo for transport damage.
2 The package should be recycled according to
local regulations.
3 Check that all parts of the product are supplied.
Compare with the Parts Designation in this IFU.
If any part is missing or damaged - do not use the
product!
4 Read the IFU.
5 Unpack the battery charger. For charging and
charger installation instructions see NEA 8000
Battery Charger IFU.
6 Charge the battery for 24 hours.
7 Perform a functionality test on the Carevo. See
section, Care and Preventive Maintenance.
8 Disinfect the product. See section, Cleaning and
Disinfection Instructions.
9 Prepare an area that is dry, with good ventilation
and out of direct sunlight for storage of the
Carevo.
10 Choose a designated area where the IFU should
be kept, accessible at all times.
11 Make sure to have a rescue plan ready in case of a
patient emergency.
Actions Before Every Use (5 Steps)
1 Check that all parts are in place. Compare with the
Parts Designation list in this IFU.
2 Carry out a thorough inspection for damage,
including mattress punctures.
3 If any part is missing or damaged - do NOT use
the product!
4
WARNING
To prevent cross-contamination always
follow the disinfection instructions in
this Instructions for Use.
5 Make sure that the battery is fully charged. See
NEA 8000 Battery Charger IFU.
NOTE
If you have any questions, please contact your
local ArjoHuntleigh representative for support
and service. The contact information
(ArjoHuntleigh addresses) is listed on the last
page of this IFU.
7