Table of Contents
Advertisement
Part Names and Functions
Top Control
q ALARM indicator
Blinks red when informing the setting or battery
status (pp.58–59).
w LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.65, 71).
e ON/STAND–BY button
Turn the projector on or off (pp.22–23).
r INPUT button
Select an input source (pp.30–31, 40–41).
t KEYSTONE button
Correct keystone distortion (pp.26, 48).
y POINT
ed7 8
–Select an item or adjust the value in the On-Screen
Menu (p.24).
–Pan the image in the Digital zoom + mode (p.39).
–Adjust the volume level (Point
12
q
w
e
r
t
y
u
(VOLUME +/–) buttons
7 8
buttons) (p.27).
i
o
!0
!1
u SELECT button
–Execute the selected item (p.24).
–Expand or compress the image in the Digital zoom
mode (p.39).
i WARNING indicator
–Lights red when the projector detects an abnormal
condition.
–Blinks red when the internal temperature of the
projector exceeds the operating range (pp.62, 71).
o POWER indicator
–Lights red when the projector is in stand-by mode.
–Lights green during operations.
–Blinks green in the Power management mode
(p.52).
!0 AUTO SETUP button
Correct vertical keystone distortion and adjust
computer display parameters such as Fine sync.,
Total dots, and Picture position (pp.26, 47).
!1 MENU button
Open or close the On-Screen Menu (p.24).
Advertisement
Table of Contents
