Table of Contents
Advertisement
Basic Operation
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER/VIDEO/NETWORK button
Press the COMPUTER, VIDEO, or NETWORK button on the
remote control to select the input source. For more detail,
see pages 30–31, 40–41.
Refer to the owner's manual "Network Set-up and
Operation" for details about the network input.
FREEZE button
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
AUTO PC button
Press the AUTO PC button on the remote control to operate
the Auto PC Adj. function. The computer screen adjustment
can be done easily by pressing this button. See page 33 for
details.
D.ZOOM buttons
Press the D.ZOOM buttons on the remote control to enter
to the Digital zoom +/– mode. See page 39 for details.
LAMP CONTROL button
Press the LAMP CONTROL button on the remote control to
select the lamp mode for changing the brightness on the
screen.
Auto ........... The brightness according to the input
signal (between High and Eco mode).
High ........... Brighter than the Normal mode.
Normal ....... Normal brightness
Eco ............. Lower brightness reduces the lamp power
consumption and extends the lamp life.
28
Remote Control
AUTO PC
button
D.ZOOM
buttons
LAMP
CONTROL
button
✔
Note:
•See the next page for the description of other
buttons.
COMPUTER/VIDEO/
NETWORK button
POINT
buttons
ed
FREEZE button
Advertisement
Table of Contents
