Table of Contents
Advertisement
Computer Input
Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 )
Direct Operation
Choose either Computer 1 (Analog) or Computer 2 by
pressing the INPUT button on the top control or press the
COMPUTER button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Input Menu icon.
2
Use the Point
pointer to either Computer 1 (Analog) or Computer 2,
and then press the SELECT button.
3
When selecting Computer 1 (Analog), RGB input
source will be selected directly.
When selecting Computer 2, the Source Select Menu
appears. Move the pointer to RGB and then press the
SELECT button.
✔
Notes:
•Wired, Wireless, and Memory viewer are for the Network function.
See owner's manual "Network Set-up and Operation" and owner's
manual of Memory viewer (optionally available).
•When the Input Search function is set to "On1" or "On2", the
input signal will be searched automatically (p.51).
30
7 8
buttons to move the red
ed
buttons to move the red arrow
Top Control
INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Remote Control
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Input Menu icon
Input Menu
Input Menu icon
Input Menu
Computer
2
Move the pointer
(red arrow) to RGB.
Computer 2
Video
Wired
Computer 2
Move the pointer (red
arrow) to Computer 1
(Analog) and press the
SELECT button.
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.
Advertisement
Table of Contents
