ZUMEX MINEX User Manual page 33

To restart the machine after a safety stop or following an alarm, eliminate the cause
(remove jammed oranges,...) and restore the safety elements (cover, juice container or
peel container). After doing this, press the ON/OFF button and the machine will start
the extraction cycle.
If the blade assembly has been dismantled to eliminate a blockage and you find it
difficult to reassemble, this is because the machine must be in the start position
to perform the mounting operation. To put it at that position, keep the ON/OFF
button pressed (with the containers and cover correctly positioned) until the
machine stops, and then you can assemble the blade unit with no problem and
continue operating.
If the power cable is damaged, it must be replaced by a special cable or unit
supplied by the manufacturer or official dealer.