Download Print this page
ZUMEX MINEX Cleaning Instructions
Hide thumbs Also See for MINEX:

Advertisement

Quick Links

CLEANING INSTRUCTIONS
MINEX
cleaning the machine at least once or twice a day
Zumex recommends
food hygiene conditions.
1
Open the cover lock.
4
Release the twirler blade and support turning
the blade lock 180º.
7
Unscrew and remove the securing knobs from
the squeezing units.
10
Remove the peel container.
13
Release the tap by pressing its sides to loose
the pins.
Caution!
below. Make sure machine is unplugged from electrical current.
2
Open the cover and pull upwards.
Remove the cover.
5
Once unlocked pull gently towards you.
CAUTION! The blade is very sharp, be careful not to cut yourself.
8
Remove both the upper and lower securing
knob.
11
Remove the juice container with its filter and
tap.
14
Remove completely the tap to clean it.
115 Matheson Blvd East, Mississauga, ON L4Z 1X8
For a correct cleaning process please follow the instructions
, depending on how much it is used in order to maintain optimal
3
Extract the retainer pulling out.
6
Remove the peel ejector pulling sideways.
9
Remove the juice jug.
12
Dismantle the juice filter from the juice
container.
!
INFORMATION
All pieces, EXCEPT THE FRONT COVER, can be
cleaned in a dishwasher.
The juice extraction zone and the front cover should be
cleaned using a moist cloth and dish washing liquid.
Rinse with clean water to remove any washing liquid
traces.
Toll Free: 855.544.8600
euromilan.com
JUICE
SOLUTIONS

Advertisement

loading

Summary of Contents for ZUMEX MINEX

  • Page 1 Caution! For a correct cleaning process please follow the instructions below. Make sure machine is unplugged from electrical current. MINEX cleaning the machine at least once or twice a day Zumex recommends , depending on how much it is used in order to maintain optimal food hygiene conditions.
  • Page 2 Caution! For a correct cleaning process please follow the instructions below. Make sure machine is unplugged from electrical current. MINEX To assemble the machine repeat the process in reverse and ready to work. Assemble the tap in the juice container pressing Make sure the tapis well fixed.