Saving; Saving Manually - wtw pH/ION 340i Operating Manual

Operation
42
4.6

Saving

The measuring instrument has an internal data memory. It can store up
to 500 data records.
A complete data record consists of:
l Number of the storage location
l Date/time
l Measured value
l Temperature
l Temperature measuring procedure
l ID number
You can transmit measured values (data records) to the data storage
in two ways:
l Save manually
l Switch on AutoStore (Int 1), (see page 44).
Note
If you connect a recorder (analog output), the output on the digital in-
terface is switched off.

4.6.1 Saving manually

You can transmit a measured value to the data storage as follows:
1 Press the <STO> key.
The current number (location number No.) of the next free stor-
age location appears under the current measured value on the
display.
ISE
U pH
S
1 6 9 9
Time Baud
8 2 4
Day.Month No.
Year Ident
Auto
AutoCal DIN
LoBat
AutoCal TEC ConCal
2 Confirm with <RUN/ENTER>.
The display switches to entering the ID number.
mol/L
2
mV/pH
% ppm
mg/L
°F
4
%
TP
°C
CalError TempError
Store
ARng AR RCL
pH/ION 340i