Reset - wtw pH/ION 340i Operating Manual

pH/ION 340i
Measurement
parameters
Configuration
parameters
4.9

Reset

You can reset (initialize) the measurement parameters and the config-
uration parameters separately from one another.
The following measuring parameters are reset to the delivery status:
pH
Measuring mode
Slope
Asymmetry
Manual temperature input
Resolution of pH display
Note
The calibration data gets lost when the measuring parameters are re-
set. Recalibrate after performing a reset.
The following configuration parameters (InI) are reset to the delivery
status:
Baud rate
Display during the
pH calibration
Interval 1
(automatic save)
Interval 2
(for data transmission)
pH
-59.16 mV/pH
0 mV
25 °C
0.001 (high resolution)
4800
Buffer nominal value
OFF
OFF
Operation
59