Detection Width Of Frequency Attained - Emotron VSB Series Instruction Manual

Emotron VSB Instruction Manual
Detection width of
C1-14
frequency attained
This parameter should be set with digital output terminal "frequency attained". When the
difference between output frequency and command frequency is less than this value, terminal
"frequency attained" aoutputs ON. See Fig. 6-15:
Output frequency
输出频率
FDT1 upper limit FDT1电平上限
FDT1 lower limit
FDT1电平下限
FDT1 terminal
FDT1端子
Output
输出
Command 设定频率
frequency
Frequency attained
频率到达端子
terminal
Chapter 6 Specification of Parameters
Fig. 6-14
Range: 0.00Hz - maximum
FREQ
频率检出宽度 Frequency detection width
Fig. 6-15
- 101 -
Time
时间
Time
时间
Factory default:
2.50Hz
Time
时间
Time
时间