Status Read Command Table - Sanyo PDG-DXT10KL User Manual

8. Specifications

Status Read Command Table

C
OMMAND
CR0 Status Read
CR6 Temperature Read
PC Control Connector (DIN-9P)
Note:
1. Pin 1, 4, 6 and 9 are not used.
2. Jumper "Request to Send" and "Clear to Send" together on both ends of the cable to simplify the cable
connection.
3. For long cables, it is recommended to set communication speed within projector menus to 9600 bps.
F
UNCTION
116