Setting Menu Descriptions and Functions
The Setup menus contain the most often used settings during installation and options to customize the general output of
the projector. Three tabs are accessible through the Setup menu, general, installation and option.
Basic
The Basic tab contains general setup options such as lamp mode and OSD language settings and can be accessed with
the projector control panel or with the remote control unit.
The following table lists all functions with a brief description.
I
TEM
Keystone
Lamp control
Lamp mode
Lamp interval
Simple menu
Language
Adjust the Keystone trapezoid
Select Lamp control. Range: Normal or Eco.
Select Lamp configuration. Range: Dual, Lamp1 or Lamp2.
Select Lamp interval. Range: Off, 1 week, 4 weeks or 2000 hours.
Displays menus with minimum essential options. This setting is best suited to novices.
Select the OSD language (see Language on page 74).
D
ESCRIPTION
see
(
Keystone page 72).
71
5. Using On-Screen Display