5. Using On-Screen Display
Network setting
The Network setting tab is accessed by using the Setup/Installation tab and contains the general LAN settings.
The following table lists all functions with a description and the default setting.
I
TEM
DHCP
IP address
Subnet
Gateway
DNS
Network PIN code
Apply settings
Select either a static IP or DHCP IP setting by selecting the appropriate radio button.
Displays the IP address.
Displays the subnet mask.
Enable or disable the network gateway setting. Click on the radio button to change the setting.
Enable or disable the DNS server settings. Click on the radio button to change the setting.
A password can be set to restrict access to the setting pages of the projector using the web
browser. The default password is "0000".
Range: 0000 ~ 9999
Apply and save settings.
D
ESCRIPTION
82