Connecting Your Dvd Player With Component Output - Sanyo PDG-DXT10KL User Manual

Connecting Your DVD Player with Component Output

To connect a DVD Player to the projector, refer to the following guide.
1. Connect the DVD Player to the projector as shown below before turning on the Player or the projector.
2. Turn on the projector and select Component from the source menu before turning on the DVD Player
(see Selecting an Input Source on page 34).
3. Turn on the DVD Player.
Note:
Refer to your DVD player's user's manual for more information about your DVD player's video output re-
quirements.
29
2. Installation and Connections