Resetting The Lamp Time Counter; Ordering A Replacement Lamp - Sanyo PDG-DXT10KL User Manual

Resetting the Lamp Time Counter

After replacing the lamp(s), the lamp hour counter(s) should be reset to zero. Refer to the following guide:
1.
Press the Menu button on the OSD
control panel or Remote Control to
open the Main menu.
2.
Press the
the Reset menu and press Select.
3.
The Reset menu is displayed. Se-
lect Clear lamp1 time or Clear
lamp2 time as required using
or
4.
A confirmation box is displayed.
Select OK using
press Select to reset the selected
Lamp hours to zero.

Ordering a Replacement Lamp

Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer.
Model No. of your projector: PDG-DXT10L, PDG-DXT10KL
Replacement Lamp Type No: POA-LMP117
(Service Parts No. 610 335 8406)
or button to move to
and press Select.
or and
101
6. Maintenance