Sanyo PDG-DXT10KL User Manual page 59

4. Convenient Features
Note:
Holding down the Keystone button for 2 seconds resets the default keystone values.
A
Keystone
The following are conditions under which the maximum angle is achieved:
When the standard lens (LNS-S40) is used
When the lens shift is set to H for center and V for 0.5 shift.
When the lens shift is used and yet you do not get the above-mentioned condition (H for center and V for 0.5 shift),
you cannot adjust the lens shift correctly.
Image is projected in Wide mode
Resolution is XGA
Note:
Higher resolution than X
Menu items should be set as follows:
Aspect Ratio ........... 4:3
Horizontal and Vertical are adjusted separately.
A combination of both adjustments narrows the adjustable range.
DJUSTMENT
GA narrows the adjustable range.
H
ORIZONTAL
Max. +/– 35° approx.
50
V
ERTICAL
Max. +/– 40° approx.