Network Computing Platforms
Installing Disk Drives
The system supports 1 x 3.5" or 2 x 2.5" SATA HDDs or SSDs (max 9.5mm height) as data
storage. Please follow the steps below for installation.
1. Remove the 4 screws that secure the disk drive tray.
2. Take the tray out from the system and refer to the figures below for either 1x 3.5" SATA
HDD/SSD or 2 x 2.5" SATA HDD/SSD mounting option.
3. Place the HDD/SSD mounted disk drive tray back to the system. Remember to connect