Measurement Computing USB-1616FS User Manual page 28

USB-1616FS User's Guide
4. Configure the SYNC pin of the slave USB-1616FS for pacer input:
Double-click on the USB-1616FS that you want to configure as the slave. The
o
Configuration
Make sure that the
o
setting).
5. Connect the SYNC pin of the master USB-1616FS to the SYNC pin of the slave USB-1616FS.
6. Set the Universal Library
to enable external pacer clock input.
An example of a master/slave configuration is shown below.
Master
USB-1616FS
PMD-1608FS
Configure the
SYNC pin
for output
When you are operating one USB-1616FS, do not set the
external clock for A/D pacing.
dialog displays.
Enable Sync output
option with
EXTCLOCK
SYNC pin
Slave
pin 42
Figure 3-12. Configuring for synchronous data acquisition
check box is not checked (unchecked is the default
cbAInScan()/AInScan
Set the Universal Library
Slave option with
EXTCLOCK
USB-1616FS
cbAInScan()/AInScan()
for the slave USB-1616FS
Configure the
SYNC pin
for input
option unless you are using an
EXTCLOCK
3-12
Functional Details
Board
for the slave USB-1616FS