Ccessories And Eplacement Arts - ResMed Ultra Mirage Clinician Manual

5
Fit the grooved edge of the nasal cushion to the
mask frame. Fit the top section first, then work
your way around the mask, pushing the cushion
onto the frame, ensuring a good seal has been
achieved. Push the cushion clip over the cushion
onto the mask frame, ensuring it clicks into place
in all locations.
6
Connect the headgear clips to the mask frame.
Thread the headgear straps through the slots on
the forehead support and the headgear clips. The
U M
headgear label should face outwards
ltra irage
and be near your neck when fitted. Fasten the
Velcro straps.
8
Mask cushion
Cushion clip
a r
ccessories and ePlaceMent
Description
Cushion (Standard)
Cushion (Large)
Cushion (Shallow)
Cushion Clip
Elbow Assembly (includes Elbow Clip)
Elbow Clip
Elbow Clip
Forehead Pad
Forehead Pad
Forehead Support
Headgear
Headgear Clips
Headgear Clips
Mask/Air Tubing Connector
(Male 22mm taper/Male 22mm barbed)
Mask/Air Tubing Connector
(Male 22mm taper/Male 22mm barbed)
Mask Frame
Ports Cap
Ports Cap
P
arts
Quantity Part
per pack Number
1 16556
1 16557
1 16558
1 16563
1 60916
1 16572
10 16573
2 16561
10 16574
1 16562
1 60917
2 16569
10 16734
1 60913
10 60914
1 60915
2 16570
10 16571