MULTIQUIP Whiteman series Operation Manual page 8

SAFETY DECALS
Safety decals associated with the operation of this
equipment are defi ned below:
Keep hands, fingers, and feet clear of engine
fan blades and guard rings. Moving parts can cut.
DO NOT use this equipment in an enclosed area.
The engine used with this equipment emits
harmful levels of carbon monoxide which can
cause severe bodily harm — even death!
This machine to be operated by qualified
personnel only. Ask for training as needed.
DO NOT remove belt guards.
Keep hands and fingers clear from engine belts.
NEVER allow any person to stand
underneath the trowel while lifting.
DO NOT lift trowel with pans attached.
ALWAYS make sure handle is securely attached.
P/N 23700
To avoid injury, you must read and understand
the operator's manual before using this machine.
ALWAYS wear appropriate clothing
P/N 36099
Indicates value of the sound power of the
equipment measured at operator's seat.
PAGE 8 — J3036H55 WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #0 (06/27/18)
DANGER
Rotating Blade Hazard
DO NOT remove guards.
Stop engine before servicing.
DANGER
Inhalation Hazard
DANGER
Training
DANGER
Belt Guard Hazard
Moving parts can crush.
WARNING
Lifting/Crush Hazard
NOTICE
Read Manual
NOTICE
Protective Clothing
when operating the trowel.
NOISE LEVEL
SAFETY INFORMATION
GENERAL SAFETY
CAUTION
„ NEVER operate this equipment without proper protective
clothing, shatterproof glasses, respiratory protection,
hearing protection, steel-toed boots and other protective
devices required by the job or city and state regulations.
„ Avoid wearing jewelry or loose fi tting clothes that may
snag on the controls or moving parts as this can cause
serious injury.
„ NEVER operate this equipment when not
feeling well due to fatigue, illness, or when
on medication.
„ NEVER operate this equipment under the
infl uence of drugs or alcohol.
„ ALWAYS clear the work area of any debris, tools, etc.
that would constitute a hazard while the equipment is
in operation.
„ No one other than the operator is to be in the working
area when the equipment is in operation.
„ DO NOT use the equipment for any purpose other than
its intended purposes or applications.