MULTIQUIP Whiteman series Operation Manual page 10

CAUTION
„ NEVER stand on the trowel during operation.
„ NEVER lubricate components or attempt service on a
running machine.
„ NEVER place your feet or hands inside the guard rings
while starting or operating this equipment.
„ ALWAYS keep the work area clear around the trowel. Make
sure it is free of debris and objects.
NOTICE
„ ALWAYS keep the machine in proper running condition.
„ Fix damage to the machine and replace any broken
parts immediately.
„ ALWAYS store equipment properly when it is not being
used. Equipment should be stored in a clean, dry location
out of the reach of children and unauthorized personnel.
„ A safety manual for operating and maintenance
personnel of concrete power trowels produced by the
Association of Equipment Manufacturers (AEM) can be
obtained for a fee by ordering through their website at
www.aem.org.
Order Form PT-160
PAGE 10 — J3036H55 WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #0 (06/27/18)
SAFETY INFORMATION
ENGINE SAFETY
WARNING
„ DO NOT place hands or fingers inside the engine
compartment while the engine is running.
„ NEVER operate the engine with heat shields or
guards removed.
„ Keep fi ngers, hands, hair and clothing away
from all moving parts to prevent injury.
„ DO NOT remove the engine oil drain plug
while the engine is hot. Allow the oil to cool before
performing maintenance. This will prevent scalding
of personnel.
CAUTION
„ NEVER touch the hot exhaust manifold,
muffl er, or cylinder. Allow these parts to cool
before servicing the equipment.
NOTICE
„ NEVER run the engine without an air fi lter or with a dirty
air fi lter. Severe engine damage may occur. Service the
air fi lter frequently to prevent engine malfunction.
„ NEVER tamper with the factory settings
of the engine or engine governor. Damage
to the engine or equipment can result
if operating in speed ranges above the
maximum allowable.