Maintenance - Gemini STITCH-L100 Manual

Maintenance

Caution:
Always make sure that the machine is unplugged
from power source and the main swit
("O") before inserting or removing any parts and
before cleaning.
Remove the Stitch Plate:
Turn the handwheel until the needle is fully raised.
Open the hinged front cover and unscrew the needle
plate screw with the screwdriver. (Pic 1)
Cleaning the Feed Dogs:
Remove the bobbin case and use the brush supplied
to clean the whole area. (Pic 2)
Cleaning and Lubricating the Hook:
Remove the bobbin case. Snap the two hook
retaining arms (a) outwards. Remove the hook
race cover (b) and the hook (C) and clean with
a soft cloth. Lubricate at the points (d) (1 to 2
drops) with sewing machine oil. Turn the
handwheel until the hook race (e) is in the left
position. Replace the hook (c). Replace the hook
race cover and snap back the two hook retaining
arms. Insert the bobbin case and bobbin and
replace the stitch plate.
Important:
Your machine should be serviced at regular intervals.
40