Blind Hem/Lingerie Stitch - Gemini STITCH-L100 Manual

Blind Hem/Lingerie Stitch

*The blind hem foot is an optional accessory not supplied
with your machine.
For hems, curtains, trousers, skirts, etc...
Blind hem for stretch fabrics, turn the pattern selector
dial so that the stitch display shows the letter "D".
Blind hem/lingerie for firm fabrics, turn the pattern
selector dial so that the stitch display shows the letters "E"
or "F".
Set the machine as illustrated.
Note:
It takes practice to sew blind hems. Always make a sewing
test piece first.
Fold the fabric as illustrated with the wrong side uppermost
(1). Place the fabric under the foot. Turn the handwheel
forwards by hand until the needle swings fully to the left.
The needle should just pierce the fold of the fabric, if it does
not, adjust the stitch width accordingly (2). Adjust the guide
(3) by turning the knob (4) so that the guide just rests
against the fold. Sew slowly by pressing the foot control
lightly, guiding the fabric along the edge of the guide.
a. Stitch Width b. Stitch Length c. Presser Foot
d. Stitch Pattern
21