Twin Needle - Gemini STITCH-L100 Manual

Twin Needle

- Turn the stitch length dial to the desired stitch length.
- Turn the pattern selector dial so that the stitch display shows
the letter "A" for the straight stitch position, and select the
centre needle position.
- Select a stitch width setting of "2.5".
- Make sure that the two threads used to thread the twin needle
are of the same weight. You can use one or two colours.
- Insert the twin needle in the same wa y as a single needle.
The flat side of the needle should face away from you.
- Follow instructions for single needle threading. Thread
each needle separately.
Note:
When sewing with a twin needle, always proceed slowly and
make sure to maintain a low speed to ensure quality stitch-
ing. When using a twin needle on a zigzag stitch, make sure
the stitch width dial is set between "0" and "2.5". Do not use
a twin needle at setting above "2.5".
36