Zippers And Piping - Gemini STITCH-L100 Manual

Zippers and Piping

Set the machine as illustrated. Turn the pattern selector dial
so that the stitch display shows the letter "A" for the
straight stitch position.
Set the stitch length control between "1" to "4" (according
to the thickness of the fabric).
The zipper foot can be inserted right or left, depending on
which side of the foot you are going to sew. (Pic 1)
To sew past the zipper pull, lower the needle into the fabric,
raise the presser foot and push the zipper pull behind the
presser foot. Lower the foot and continue to sew.
It is also possible to sew in a length of piping cord into a
bias strip to form a 'welt'. (Pic 2)
25