Reverse Sewing/Removing The Work/Cutting The Thread - Gemini STITCH-L100 Manual

Reverse Sewing
Removing the Work
Cutting the Thread
Reverse sewing is used for locking the end of seams
and where reinforcement is needed. At the end of a
seam, press down the reverse sewing lever and touch
the foot control lightly. Sew a few reverse stitches.
Release the lever and the machine will sew forwards
again (A).
Turn the handwheel towards you to bring the thread
take up lever to its highest position. Raise the presser
foot and draw the fabric away from you.
Hold the threads behind the presser foot. Using both
hands, guide them to the slit at the rear of the presser
bar and press down to cut the thread. You can also
use the thread cutter on the side of the machine (B).
16