Table of Contents
Advertisement
Free Motion Darning
*The darning foot is included with your machine.
Set the machine as illustrated.
Install the embroidering plate. (Pic 1)
Remove the presser foot clamp. (Pic 2)
Attach the darning foot to the presser foot bar. The lever
(A) should be behind the needle clamp screw (B). Press
the darning foot on firmly from behind with your index
finger and tighten the screw (C). (Pic 3)
First sew round the edge of the hole (to secure the
threads). (Pic 4)
First row: Always work from left to right.
Turn the work by 90 degrees and oversew.
31
Hide quick links:
Advertisement
Table of Contents
