Sewing On Buttons - Gemini STITCH-L100 Manual

Sewing on Buttons

*The button sewing foot is an optional accessory not
supplied with your machine.
Install the embroidering plate to the needle plate as
illustrated. (Pic 1)
Change the presser foot to the button sewing foot.
Position the work under the foot. Place the button in the
desired position and lower the foot. Set the pattern
selector dial on zigzag stitch " ". Adjust the stitch width
to "3" to "5" according to the distance between the two
holes of the button. Turn the handwheel to check that the
needle goes cleanly into the left and right holes of the
button and slowly sew on the button with about 10 stitch-
es. Secure the threads on the reverse by hand.
If a shank is required, place a darning needle on top of the
the button and sew (Pic 3). For buttons with 4 holes, sew
through the front two holes first (Pic 2), push the work
forward and then sew through the back two holes (Pic 3).
23