Appliqué - Gemini STITCH-L100 Manual

Appliqué
- Turn the stitch length dial to the desired length.
- Turn the pattern selector dial so that the stitch display
shows the letter "B" for the zigzag stitch position.
- Select a narrow zigzag width.
- Cut out the appliqué design and either tack it to the fabric
by hand, or adhere it using a fabric adhesive.
- Sew slowly around the edge of the design.
- Trim any excess material outside the stitching. Make sure
not to cut any stitches.
- Remove the tacking stitches if used.
- Tie the top and bottom thread under the appliqué to
avoid unraveling.
35